Amiga – C64 to USB Joystick adapter (New firmware compatible with the C64mini & MAXI)



Out of stock

Categories: , ,


This little board allows to connect your retro DB9 amiga / C64 joystick device and use it on your favorite emulator.


Does not require any driver (is detected by windows as a game controller).

Supports autofire (if your joysticks allows it).

Works from Win XP to Win10 and also Linux, MacOSX and Morph OS.

NEW Works directly on C64 Maxi and Mini. Also supports firmware update via USB, so no programmer needed to update the flash on futher updates.

Just plug and play :).

Update: 12/01/2020: New firmware used based on the Stefan Blixth design Now it’s compatible with C64 Mini and Maxi.

Update: 06/12/2018: Now works with 64mini too 🙂 (note: depending on your game, maybe the original c64mini joystick is required to setup the game, then you can use your old retro joystick).


Firmware Update instructions:

Download the HIDBootFlash tool from here:

Hold the fire button all the time.

Connect the USB adapter on your computer.

Start the tool (maybe will require start with administrator rights).

Push the find device.

If all goes OK you will see something like Device size: 00008192

Push the open .hex file button, browse to the hex file, hit OK.

Push the Flash Device, if all goes OK you will see something like this.

Disconnect and reconnect and you will have the last firmware updated!.


It will not work on usb 3.0 ports, only on 1.1 or 2.0 ports (if your usb port does not work with good source of amps, a USB HUB 2.0 is required).

Micro usb b cable required (the android charger cable for example) not included.


Additional information

Weight 100 g
Dimensions 10 × 10 × 10 cm