X68000 advanced video adapter


Out of stock



This device allows you you to plug in your TV directly to your x68000; computer. This adapter has an embedded HDMI codec capable of getting RGB and audio signal codec to HDMI. In case your monitor does not support the HDMI signal resolution you could always you a conjunction of rgb+framemeister or gbs to obtain the best results. The adapter has both rgb + analog audio connectors and HDMI upscaler from rgb and audio all embedded into the HDMI connection.

What’s included:

Adapter with HDMI connection (rgb + audio passthrough) + RGB and audio analog connectors for external upscaler+ scandoubler solutions. (Framemeister ir gbs).


The HDMI connection depends entirely on your monitor/TV device. According to the tests, results were found to be better on tv’s than monitors. In case your TV or monitor does not support the resolution in HDMI you could always use the rgb + audio connections with a framemeister or gbs converters.


You will need to feed the adapter with 5V micro USB power supply to make it work.


Resolution below 320×200 is not allowed in HDMI mode.

FM Towns and PC 9801:

This device has the same pinout compatible with FM Towns and PC 9801, meaning pins 7, 9, and 13 are not connected on DB15, so theoretically, it should work on those machines. Also, note that on some units, pin 7 is cut on purpose since it is not being used but was connected to the initial design.

More info about the pinout, here: https://gamesx.com/wiki/doku.php?id=av:japanese_rgb-15

Additional information

Weight 100 g
Dimensions 10 × 10 × 10 cm